If you are looking for ways how to change tap washer that’s been bothering you for a while, you can easily fix it with simple methods right away.
You may not have the right tools or expertise for local plumbers to fix your drains, but you do have other options, which is to hire a plumber Sydney for all your plumbing repairs.
Professionals plumber for pipe relining from Sydney knows very well how to fix damaged pipes and can rapidly fix the plumbing system in your house. You can rely on the experts at Civic Plumbing to have everything they need to identify and fix any drainage issues.
The plumbers at Civil Plumbing are qualified to handle any emergency, even issues with your sewer relining Sydney, or if you are on a tight budget, here are easy steps to change your tap washer by yourself without needing to spend a good amount of your savings on a professional fix.
Simple Guide on How to Change Tap Washer
You may get tired of searching for ways on how to change tap washer online, but here are simple and easy steps for you to follow to have them fixed.
A tap washer experiences significant wear and tear; therefore, its quality will deteriorate over time. This often means that the seal or the affordable pipes are no longer trustworthy enough to retain water inside when the water supply is interrupted. As a result, water will start to drip out of the faucet gradually.
You may need to replace the washer if your tap leaks or if lime scale corrosion or other damage has caused these issues. Most of the time, this is all that is required to fix a leaking faucet. If it doesn't fix anything, you'll need the help of a licensed plumber.
Before you start changing tap washers, first check your toolbox to make sure you have all the required equipment and materials.
Here is what you'll need:
- Replacement washers
- Spanners
- Flat-headed tweezer
- Philipp’s screwdriver
- Tweezers or needle-nose pliers
- Textiles for sweeping
Please be advised that you should consult a professional if your plumbing requirements extend beyond a simple washer replacement. Before doing any more plumbing improvements, you should first learn about the state's plumbing regulations. It is illegal to do plumbing work without a license, and doing so will disqualify you from insurance.
By following these 8 easy steps, you can replace the washer in your sink faucet with ease:
1. Turn off the Water Supply
Before trying to replace the washer, make sure the water is turned off to the faucet. There are two ways to stop the flow of water:
The shutdown valve is located near your water meter. By shutting the isolation valve, turn off the water supply to the tub or sink. Open the tap after you're done to allow the water to drain from the pipes. It is then advised to place the stopper in the tub or sink to prevent any debris from falling in.
2. Disconnect the Tap Button
The button on a tap is often found on top of the gadget. The majority of faucets include a sign that indicates whether the water is hot or cold. You must unscrew this button in order to access the tap's internal components. A simple flathead screwdriver is all that is required to remove the tap button.
The indentation on the majority of tap buttons may be accessed by sliding a screwdriver underneath the button. With the use of a screwdriver, you may peel the button off the tap's top using this notch.
3. Remove the Handle
Under the tap button, there is a screw. Depending on the kind of screw head it includes, you should use a flathead or Phillips screwdriver to remove screws by rotating them anticlockwise. Once the screw has been removed, the tap handle may be removed by raising it up.
4. Remove the Tap's Skirt
A metal skirt might also be present on the tap. You'll need to use pliers to remove this since it can be sealed in place.
5. Eliminate the Tap Cover
The main body of a tap is referred to as the tap's "bonnet." Get a spanner and remove this right now. The tap's brass or plastic jumper valve may then be checked. The washer will easily fit into this when you disassemble it as well.
6. Remove the Washer
It may be challenging to replace the tap washer since it may be fastened with a small nut or screw. You may remove this with a screwdriver and then remove the tap washer using tweezers or needle-nose pliers.
7. The Faucet’s Washer Has to Be Replaced
It's critical that the washer you replace it with fits correctly since tap washers may come in a variety of sizes and shapes. If you bring the old washer in, the professionals at your neighborhood hardware store will be able to assist you in finding the appropriate replacement washer for your worn-out tap.
With the aid of tweezers, needle-nose pliers, or your fingers, slide the new washer onto the tap stem. After that, you should replace the old washer and the little screw holding it in place.
8. Reassemble the Tap and Turn on the Water Supply
Reverse the disassembly process to assemble the tap, being sure to reinstall each part in the correct spot and in the order that it was removed. Ensure that each screw is well fastened.
Conclusion
